Dan-dugan-sound-design E-1 Manual do Utilizador descarregar pdf (Página 16)

Dugan Models E-1 and E-1A User Guide

Power Supply

Units shipped to the USA include a 12 V, 1.5 A, 120 VAC power supply. Contact the

factory if you require a different power supply. In an emergency, the Model E-1A can

accept power supplies within the following ranges:

• 12–24 VDC, either polarity, 1.5 A

• 9–18 VAC, 1.5 A

Audio Wiring

The ANALOG–DIGITAL switch selects which input is active, but both outputs remain active.

Analog I/O

Set the ANALOG–DIGITAL switch to ANALOG.

Figure 3-2 Analog connection

The eight channel inputs and outputs are TRS insert jacks. The Model E-1A receives

signal on the Tip and sends the return from the Ring.

When the Model E-1A is off, the audio signal passes through unaltered, so the unit

may be left patched when not in use.

The Model E-1A can be connected to the insert or line level input jacks.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Sem comentários

Dan-dugan-sound-design E-1 Manual do Utilizador Página 16